complexType JobParts
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p237.png
namespace https://printfactory.cloud/schema/2.0
children pf:Part
used by
elements Job/Imposition_original/Parts JobParts/Part/Parts ImpositionGroup/Imposition/Parts
annotation
documentation
Layout of the output page as list of parts from the input documents
source <xs:complexType name="JobParts">
  <xs:annotation>
    <xs:documentation>Layout of the output page as list of parts from the input documents</xs:documentation>
  </xs:annotation>
  <xs:sequence>
    <xs:element name="Part" maxOccurs="unbounded">
      <xs:complexType>
        <xs:choice maxOccurs="unbounded">
          <xs:element name="GUID" type="pf:GUID">
            <xs:annotation>
              <xs:documentation>ID of the part</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="OriginalPart" type="pf:GUID" minOccurs="0">
            <xs:annotation>
              <xs:documentation>ID of the part from which this is a copy. Counting copies on the output page is based on this ID. When not present it is assumed to be value of GUID.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="CounterpartGUID" type="pf:GUID" minOccurs="0">
            <xs:annotation>
              <xs:documentation>In case of a double sided job this it the ID of the part on the other side of the page.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="SourcePage" type="xs:nonNegativeInteger" default="0" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Page number of the document from which a part is output.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="SourceArea">
            <xs:annotation>
              <xs:documentation>Area from the source document its source page to be output.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:attribute name="Left" type="xs:decimal" use="required"/>
              <xs:attribute name="Top" type="xs:decimal" use="required"/>
              <xs:attribute name="Right" type="xs:decimal" use="required"/>
              <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
            </xs:complexType>
          </xs:element>
          <xs:element name="Scale" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Scale factor; the source area will be output scaled by this factor.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:attribute name="X" type="xs:decimal" default="1"/>
              <xs:attribute name="Y" type="xs:decimal" default="1"/>
            </xs:complexType>
          </xs:element>
          <xs:element name="DestinationPage" default="1" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Page number of the ouput where the part is place. Output pages are 1 based.</xs:documentation>
            </xs:annotation>
            <xs:simpleType>
              <xs:restriction base="xs:positiveInteger"/>
            </xs:simpleType>
          </xs:element>
          <xs:element name="Position">
            <xs:annotation>
              <xs:documentation>Position on the ouput page where the part is placed. The position is the left top corner of the bounding rectangle of the part incl. markup and decoration.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:attribute name="X" type="xs:decimal" use="required"/>
              <xs:attribute name="Y" type="xs:decimal" use="required"/>
            </xs:complexType>
          </xs:element>
          <xs:element name="MediaSizeCompensation" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Compensation factors to be applied on the source scale to mitigate for stretch and shrink during production.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:attribute name="X" type="xs:decimal"/>
              <xs:attribute name="Y" type="xs:decimal"/>
            </xs:complexType>
          </xs:element>
          <xs:element name="Space" type="xs:decimal" default="0" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Amount of space between this and other parts to be applied when this part is nested.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="MarkerSize" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Border size around the part used for marks and decoration.
Default 0 when not present.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:attribute name="Left" type="xs:decimal" default="0"/>
              <xs:attribute name="Top" type="xs:decimal" default="0"/>
              <xs:attribute name="Right" type="xs:decimal" default="0"/>
              <xs:attribute name="Bottom" type="xs:decimal" default="0"/>
            </xs:complexType>
          </xs:element>
          <xs:element name="MarkerType" type="xs:unsignedInt" default="0" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Registration marks used for this part. These bit flags as some can be combined but most are mutual exclusive:
0 : Registration marks
1 : Crop marks
2 : Border
3 : Template
4 : Subscript

Special part type when bit 11 (Placeholder) is set. Then the part has no output and is only showing marks. Usually in combination with one of the following cutter registration marks.
5 : OPOS marks
6 : EPOS marks
7 : HP marks
8 : Fotoba marks
12 : Roland marks
13 : Mimaki v1 marks
18: Graphtec marks
22 : Mimaki v2 marks
24 : Mimaki v0 marks
25 : Register page
26 : Roland GX marks
27 : Mimaki v3 marks
28 : Camera marks</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="Orientation" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Orientation intent for this part during nesting. When not defined this part is allowed to rotate freely.</xs:documentation>
            </xs:annotation>
            <xs:simpleType>
              <xs:restriction base="xs:string">
                <xs:enumeration value="Portrait"/>
                <xs:enumeration value="Landscape"/>
                <xs:enumeration value="Rotate180"/>
                <xs:enumeration value="Rotate270"/>
              </xs:restriction>
            </xs:simpleType>
          </xs:element>
          <xs:element name="Angle" default="0" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Angle at which the part is output.</xs:documentation>
            </xs:annotation>
            <xs:simpleType>
              <xs:restriction base="xs:decimal">
                <xs:minInclusive value="0"/>
                <xs:maxExclusive value="360"/>
              </xs:restriction>
            </xs:simpleType>
          </xs:element>
          <xs:element name="Mirror" type="xs:boolean" minOccurs="0">
            <xs:annotation>
              <xs:documentation>When set then the content of the part is mirror, the marks/decoration not.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="BarCode" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Barcode related to a placeholder part (MarkType bit 11 set) representing cutter registration marks. This barcode is copied into the job when the page is produced to inform the device driver.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:simpleContent>
                <xs:extension base="xs:string"/>
              </xs:simpleContent>
            </xs:complexType>
          </xs:element>
          <xs:element name="BleedType" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Type of bleed to be generated around the part when BleedSize is set:
0 : Mirror the content
1 : Stretch the edge of the content
2 : Solid color as defined by SolidBleedColor
3 : Document; extent the mask, usually taking the documents designed bleed
4 : Trueshape; Stretch or mirror the content within the cutcontours</xs:documentation>
            </xs:annotation>
            <xs:simpleType>
              <xs:restriction base="xs:nonNegativeInteger">
                <xs:minInclusive value="0"/>
                <xs:maxInclusive value="4"/>
              </xs:restriction>
            </xs:simpleType>
          </xs:element>
          <xs:element name="BleedSize" type="xs:decimal" default="0" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Amount of bleed to generate around the part</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="SolidBleedColor" type="xs:unsignedInt" minOccurs="0">
            <xs:annotation>
              <xs:documentation>RGB 8-bit packed color; R  + G * 256 + B * 65536
Used when BleedType=2</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="Border" default="0" minOccurs="0">
            <xs:annotation>
              <xs:documentation>When present a border will be printed around the part.
The value represents the border offset. The border is moved outward by this value when positive on inward when negative.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:simpleContent>
                <xs:extension base="xs:decimal">
                  <xs:attribute name="Type" use="required">
                    <xs:annotation>
                      <xs:documentation>Method of how the border is to be displayed.</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                      <xs:restriction base="xs:string">
                        <xs:enumeration value="Solid"/>
                        <xs:enumeration value="Dash"/>
                        <xs:enumeration value="Crop"/>
                        <xs:enumeration value="Cut"/>
                      </xs:restriction>
                    </xs:simpleType>
                  </xs:attribute>
                  <xs:attribute name="Color" use="optional">
                    <xs:simpleType>
                      <xs:restriction base="xs:string">
                        <xs:enumeration value="Black"/>
                        <xs:enumeration value="Cyan"/>
                        <xs:enumeration value="Magenta"/>
                        <xs:enumeration value="Yellow"/>
                        <xs:enumeration value="Red"/>
                      </xs:restriction>
                    </xs:simpleType>
                  </xs:attribute>
                  <xs:attribute name="BoxName" use="optional" default="Page">
                    <xs:annotation>
                      <xs:documentation>PDF box to use as border of cut contour (when Type=Cut)</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                      <xs:restriction base="xs:string">
                        <xs:enumeration value="Page"/>
                        <xs:enumeration value="PrintBox"/>
                        <xs:enumeration value="MediaBox"/>
                        <xs:enumeration value="CropBox"/>
                        <xs:enumeration value="BleedBox"/>
                        <xs:enumeration value="TrimBox"/>
                        <xs:enumeration value="ArtBox"/>
                      </xs:restriction>
                    </xs:simpleType>
                  </xs:attribute>
                </xs:extension>
              </xs:simpleContent>
            </xs:complexType>
          </xs:element>
          <xs:element name="Document" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Reference to the Document section in the job. All parts must have this tag except for placeholder parts (MarkType bit 11 set)</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:attribute name="GUID" type="pf:GUID" use="required"/>
              <xs:attribute name="Page" type="xs:nonNegativeInteger" use="required"/>
            </xs:complexType>
          </xs:element>
          <xs:element name="Colorway" type="xs:string" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Name of the colorway to select from the document-page.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="ThumbnailGUID" type="pf:GUID" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Resource ID of the thumbnail PNG as known in the cloud</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="JobLabel" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Job ticket to be printed along the part</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:choice maxOccurs="unbounded">
                <xs:element name="Name" type="xs:string">
                  <xs:annotation>
                    <xs:documentation>Name of the job ticket to be printed with this part. The name is referring to the name of the Label resource in the cloud.</xs:documentation>
                  </xs:annotation>
                </xs:element>
                <xs:element name="Width">
                  <xs:annotation>
                    <xs:documentation>Width of the job ticket in units.</xs:documentation>
                  </xs:annotation>
                  <xs:simpleType>
                    <xs:restriction base="xs:decimal">
                      <xs:minExclusive value="0"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:element>
                <xs:element name="Height">
                  <xs:annotation>
                    <xs:documentation>Height of the job ticket in units.</xs:documentation>
                  </xs:annotation>
                  <xs:simpleType>
                    <xs:restriction base="xs:decimal">
                      <xs:minExclusive value="0"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:element>
                <xs:element name="Position" default="Bottom" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Position of the ticket relative to the part when AutoPosition is off.</xs:documentation>
                  </xs:annotation>
                  <xs:simpleType>
                    <xs:restriction base="xs:string">
                      <xs:enumeration value="Bottom"/>
                      <xs:enumeration value="Top"/>
                      <xs:enumeration value="Left"/>
                      <xs:enumeration value="Right"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:element>
                <xs:element name="AutoPosition" type="xs:boolean" default="false" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Automatically determine the position of the ticket, ignoring Position</xs:documentation>
                  </xs:annotation>
                </xs:element>
                <xs:element name="InsideJob" type="xs:boolean" default="false" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Position the ticket inside the part content area. Respecting Position or AutoPosition</xs:documentation>
                  </xs:annotation>
                </xs:element>
                <xs:element name="OffsetX" type="xs:decimal" default="0" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>X offset from the position determined by (Auto)Position.</xs:documentation>
                  </xs:annotation>
                </xs:element>
                <xs:element name="OffsetY" type="xs:decimal" default="0" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Y offset from the position determined by (Auto)Position.</xs:documentation>
                  </xs:annotation>
                </xs:element>
              </xs:choice>
            </xs:complexType>
          </xs:element>
          <xs:element name="Side" default="A" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Defines the side where this part should appear:
- A : Front side
- B : Back side
- X : Blocker layer</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:simpleContent>
                <xs:extension base="xs:string">
                  <xs:attribute name="Work" use="optional" default="Turn">
                    <xs:annotation>
                      <xs:documentation>Method of doublesided layout is used for this part: Turn or Tumble</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                      <xs:restriction base="xs:string">
                        <xs:enumeration value="Turn"/>
                        <xs:enumeration value="Tumble"/>
                      </xs:restriction>
                    </xs:simpleType>
                  </xs:attribute>
                </xs:extension>
              </xs:simpleContent>
            </xs:complexType>
          </xs:element>
          <xs:group ref="pf:JobPartNestingGroup" minOccurs="0"/>
          <xs:element name="TrueShapeNested" type="xs:boolean" default="false" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Indicates that the part its cut contour is to be used as mask during rendering.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:group ref="pf:JobPartTilingGroup" minOccurs="0"/>
          <xs:element name="CropBoxes" minOccurs="0">
            <xs:annotation>
              <xs:documentation>List of PDF crop boxes available for this part's document</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:sequence>
                <xs:element name="CropBox" maxOccurs="unbounded">
                  <xs:complexType>
                    <xs:sequence>
                      <xs:element name="Name" type="xs:string">
                        <xs:annotation>
                          <xs:documentation>Name of the cropbox used by selector SelectedCropBoxName</xs:documentation>
                        </xs:annotation>
                      </xs:element>
                      <xs:element name="Type">
                        <xs:annotation>
                          <xs:documentation>Type of box:
- Page : Page bounding box
- PDFBox : Box defined by the PDF
- UserDefined : Customer defined crop</xs:documentation>
                        </xs:annotation>
                        <xs:simpleType>
                          <xs:restriction base="xs:string">
                            <xs:enumeration value="Page"/>
                            <xs:enumeration value="PDFBox"/>
                            <xs:enumeration value="UserDefined"/>
                          </xs:restriction>
                        </xs:simpleType>
                      </xs:element>
                      <xs:element name="Rect">
                        <xs:complexType>
                          <xs:attribute name="Left" type="xs:decimal" use="required"/>
                          <xs:attribute name="Top" type="xs:decimal" use="required"/>
                          <xs:attribute name="Right" type="xs:decimal" use="required"/>
                          <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
                        </xs:complexType>
                      </xs:element>
                    </xs:sequence>
                  </xs:complexType>
                </xs:element>
              </xs:sequence>
            </xs:complexType>
          </xs:element>
          <xs:element name="SelectedCropBoxName" type="xs:string" minOccurs="0">
            <xs:annotation>
              <xs:documentation>SourceArea represent the crop box with this name in the CropBoxes list</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="StepAndRepeat" minOccurs="0">
            <xs:complexType>
              <xs:choice maxOccurs="unbounded">
                <xs:element name="Type">
                  <xs:annotation>
                    <xs:documentation>Step and repeat method:
0 : Off
1 : Straight
2 : Horizontal
3 : Vertical
4 : Horizontal return
5 : Vertical return
6 : Horizontal returned jump
7 : Vertical returned jump
8 : Horizontal and Vertical return</xs:documentation>
                  </xs:annotation>
                  <xs:simpleType>
                    <xs:restriction base="xs:unsignedByte">
                      <xs:minInclusive value="0"/>
                      <xs:maxInclusive value="8"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:element>
                <xs:element name="Design">
                  <xs:annotation>
                    <xs:documentation>Dimensions of the design to be stepped and repeated.</xs:documentation>
                  </xs:annotation>
                  <xs:complexType>
                    <xs:attribute name="Width" use="required">
                      <xs:simpleType>
                        <xs:restriction base="xs:decimal">
                          <xs:minExclusive value="0"/>
                        </xs:restriction>
                      </xs:simpleType>
                    </xs:attribute>
                    <xs:attribute name="Height" use="required">
                      <xs:simpleType>
                        <xs:restriction base="xs:decimal">
                          <xs:minExclusive value="0"/>
                        </xs:restriction>
                      </xs:simpleType>
                    </xs:attribute>
                  </xs:complexType>
                </xs:element>
                <xs:element name="Offset" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Starting offset of the step-and-repeat pattern</xs:documentation>
                  </xs:annotation>
                  <xs:complexType>
                    <xs:attribute name="X" type="xs:decimal" default="0"/>
                    <xs:attribute name="Y" type="xs:decimal" default="0"/>
                  </xs:complexType>
                </xs:element>
                <xs:element name="Repeats" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Number of repeats to be generated in each direction. When not present then the area defined by SourceArea is filled with the design.</xs:documentation>
                  </xs:annotation>
                  <xs:complexType>
                    <xs:attribute name="X" type="xs:nonNegativeInteger" use="required"/>
                    <xs:attribute name="Y" type="xs:nonNegativeInteger" use="required"/>
                  </xs:complexType>
                </xs:element>
                <xs:element name="Spacing" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Space in between the repeated designs in each direction.</xs:documentation>
                  </xs:annotation>
                  <xs:complexType>
                    <xs:attribute name="X" type="xs:decimal" use="required"/>
                    <xs:attribute name="Y" type="xs:decimal" use="required"/>
                  </xs:complexType>
                </xs:element>
                <xs:element name="Drop" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>Defines the drop at each step. Either defined a Numerator / Denominator or Size in units. When not present 0 drop is used.</xs:documentation>
                  </xs:annotation>
                  <xs:complexType>
                    <xs:attribute name="Numerator" type="xs:nonNegativeInteger"/>
                    <xs:attribute name="Denominator" type="xs:nonNegativeInteger"/>
                    <xs:attribute name="Size">
                      <xs:simpleType>
                        <xs:restriction base="xs:decimal">
                          <xs:minInclusive value="0"/>
                        </xs:restriction>
                      </xs:simpleType>
                    </xs:attribute>
                  </xs:complexType>
                </xs:element>
              </xs:choice>
            </xs:complexType>
          </xs:element>
          <xs:element name="UserData" minOccurs="0">
            <xs:annotation>
              <xs:documentation>User defined Key/Value pairs as simple elements in this node.</xs:documentation>
            </xs:annotation>
            <xs:complexType>
              <xs:sequence>
                <xs:element name="BarCode" minOccurs="0">
                  <xs:annotation>
                    <xs:documentation>User's barcode related to this part. The barcode can be reference from the parts job ticket or other track and trace systems.</xs:documentation>
                  </xs:annotation>
                  <xs:complexType>
                    <xs:simpleContent>
                      <xs:extension base="xs:string">
                        <xs:attribute name="Type" type="xs:string">
                          <xs:annotation>
                            <xs:documentation>Type of barcode; Code39 as default</xs:documentation>
                          </xs:annotation>
                        </xs:attribute>
                      </xs:extension>
                    </xs:simpleContent>
                  </xs:complexType>
                </xs:element>
                <xs:any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
              </xs:sequence>
            </xs:complexType>
          </xs:element>
          <xs:element name="Reprinted" type="xs:boolean" default="false" minOccurs="0">
            <xs:annotation>
              <xs:documentation>Indicates that this parts is reprinted. Details are specified in the journal entry.</xs:documentation>
            </xs:annotation>
          </xs:element>
          <xs:element name="Parts" type="pf:JobParts" minOccurs="0"/>
        </xs:choice>
      </xs:complexType>
    </xs:element>
  </xs:sequence>
</xs:complexType>

element JobParts/Part
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p238.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 1
maxOcc unbounded
content complex
children pf:GUID pf:OriginalPart pf:CounterpartGUID pf:SourcePage pf:SourceArea pf:Scale pf:DestinationPage pf:Position pf:MediaSizeCompensation pf:Space pf:MarkerSize pf:MarkerType pf:Orientation pf:Angle pf:Mirror pf:BarCode pf:BleedType pf:BleedSize pf:SolidBleedColor pf:Border pf:Document pf:Colorway pf:ThumbnailGUID pf:JobLabel pf:Side pf:PhysicalGroupID pf:LogisticGroupID pf:PrintDeadline pf:DateCreated pf:SourcePartGUID pf:FileSourceGUID pf:CopyName pf:TrueShapeNested pf:IsTile pf:AutoClose pf:Column pf:Row pf:OverlapSize pf:OverlapWhite pf:OverlapTransparent pf:Label pf:PrintTopLabel pf:PrintLeftLabel pf:PrintRightLabel pf:PrintBottomLabel pf:OverlapLabel pf:CropBoxes pf:SelectedCropBoxName pf:StepAndRepeat pf:UserData pf:Reprinted pf:Parts
source <xs:element name="Part" maxOccurs="unbounded">
  <xs:complexType>
    <xs:choice maxOccurs="unbounded">
      <xs:element name="GUID" type="pf:GUID">
        <xs:annotation>
          <xs:documentation>ID of the part</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="OriginalPart" type="pf:GUID" minOccurs="0">
        <xs:annotation>
          <xs:documentation>ID of the part from which this is a copy. Counting copies on the output page is based on this ID. When not present it is assumed to be value of GUID.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="CounterpartGUID" type="pf:GUID" minOccurs="0">
        <xs:annotation>
          <xs:documentation>In case of a double sided job this it the ID of the part on the other side of the page.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="SourcePage" type="xs:nonNegativeInteger" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Page number of the document from which a part is output.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="SourceArea">
        <xs:annotation>
          <xs:documentation>Area from the source document its source page to be output.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="Left" type="xs:decimal" use="required"/>
          <xs:attribute name="Top" type="xs:decimal" use="required"/>
          <xs:attribute name="Right" type="xs:decimal" use="required"/>
          <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="Scale" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Scale factor; the source area will be output scaled by this factor.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="X" type="xs:decimal" default="1"/>
          <xs:attribute name="Y" type="xs:decimal" default="1"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="DestinationPage" default="1" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Page number of the ouput where the part is place. Output pages are 1 based.</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:positiveInteger"/>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Position">
        <xs:annotation>
          <xs:documentation>Position on the ouput page where the part is placed. The position is the left top corner of the bounding rectangle of the part incl. markup and decoration.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="X" type="xs:decimal" use="required"/>
          <xs:attribute name="Y" type="xs:decimal" use="required"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="MediaSizeCompensation" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Compensation factors to be applied on the source scale to mitigate for stretch and shrink during production.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="X" type="xs:decimal"/>
          <xs:attribute name="Y" type="xs:decimal"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="Space" type="xs:decimal" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Amount of space between this and other parts to be applied when this part is nested.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="MarkerSize" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Border size around the part used for marks and decoration.
Default 0 when not present.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="Left" type="xs:decimal" default="0"/>
          <xs:attribute name="Top" type="xs:decimal" default="0"/>
          <xs:attribute name="Right" type="xs:decimal" default="0"/>
          <xs:attribute name="Bottom" type="xs:decimal" default="0"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="MarkerType" type="xs:unsignedInt" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Registration marks used for this part. These bit flags as some can be combined but most are mutual exclusive:
0 : Registration marks
1 : Crop marks
2 : Border
3 : Template
4 : Subscript

Special part type when bit 11 (Placeholder) is set. Then the part has no output and is only showing marks. Usually in combination with one of the following cutter registration marks.
5 : OPOS marks
6 : EPOS marks
7 : HP marks
8 : Fotoba marks
12 : Roland marks
13 : Mimaki v1 marks
18: Graphtec marks
22 : Mimaki v2 marks
24 : Mimaki v0 marks
25 : Register page
26 : Roland GX marks
27 : Mimaki v3 marks
28 : Camera marks</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="Orientation" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Orientation intent for this part during nesting. When not defined this part is allowed to rotate freely.</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:enumeration value="Portrait"/>
            <xs:enumeration value="Landscape"/>
            <xs:enumeration value="Rotate180"/>
            <xs:enumeration value="Rotate270"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Angle" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Angle at which the part is output.</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:decimal">
            <xs:minInclusive value="0"/>
            <xs:maxExclusive value="360"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Mirror" type="xs:boolean" minOccurs="0">
        <xs:annotation>
          <xs:documentation>When set then the content of the part is mirror, the marks/decoration not.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="BarCode" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Barcode related to a placeholder part (MarkType bit 11 set) representing cutter registration marks. This barcode is copied into the job when the page is produced to inform the device driver.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:simpleContent>
            <xs:extension base="xs:string"/>
          </xs:simpleContent>
        </xs:complexType>
      </xs:element>
      <xs:element name="BleedType" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Type of bleed to be generated around the part when BleedSize is set:
0 : Mirror the content
1 : Stretch the edge of the content
2 : Solid color as defined by SolidBleedColor
3 : Document; extent the mask, usually taking the documents designed bleed
4 : Trueshape; Stretch or mirror the content within the cutcontours</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:nonNegativeInteger">
            <xs:minInclusive value="0"/>
            <xs:maxInclusive value="4"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="BleedSize" type="xs:decimal" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Amount of bleed to generate around the part</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="SolidBleedColor" type="xs:unsignedInt" minOccurs="0">
        <xs:annotation>
          <xs:documentation>RGB 8-bit packed color; R  + G * 256 + B * 65536
Used when BleedType=2</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="Border" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>When present a border will be printed around the part.
The value represents the border offset. The border is moved outward by this value when positive on inward when negative.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:simpleContent>
            <xs:extension base="xs:decimal">
              <xs:attribute name="Type" use="required">
                <xs:annotation>
                  <xs:documentation>Method of how the border is to be displayed.</xs:documentation>
                </xs:annotation>
                <xs:simpleType>
                  <xs:restriction base="xs:string">
                    <xs:enumeration value="Solid"/>
                    <xs:enumeration value="Dash"/>
                    <xs:enumeration value="Crop"/>
                    <xs:enumeration value="Cut"/>
                  </xs:restriction>
                </xs:simpleType>
              </xs:attribute>
              <xs:attribute name="Color" use="optional">
                <xs:simpleType>
                  <xs:restriction base="xs:string">
                    <xs:enumeration value="Black"/>
                    <xs:enumeration value="Cyan"/>
                    <xs:enumeration value="Magenta"/>
                    <xs:enumeration value="Yellow"/>
                    <xs:enumeration value="Red"/>
                  </xs:restriction>
                </xs:simpleType>
              </xs:attribute>
              <xs:attribute name="BoxName" use="optional" default="Page">
                <xs:annotation>
                  <xs:documentation>PDF box to use as border of cut contour (when Type=Cut)</xs:documentation>
                </xs:annotation>
                <xs:simpleType>
                  <xs:restriction base="xs:string">
                    <xs:enumeration value="Page"/>
                    <xs:enumeration value="PrintBox"/>
                    <xs:enumeration value="MediaBox"/>
                    <xs:enumeration value="CropBox"/>
                    <xs:enumeration value="BleedBox"/>
                    <xs:enumeration value="TrimBox"/>
                    <xs:enumeration value="ArtBox"/>
                  </xs:restriction>
                </xs:simpleType>
              </xs:attribute>
            </xs:extension>
          </xs:simpleContent>
        </xs:complexType>
      </xs:element>
      <xs:element name="Document" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Reference to the Document section in the job. All parts must have this tag except for placeholder parts (MarkType bit 11 set)</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="GUID" type="pf:GUID" use="required"/>
          <xs:attribute name="Page" type="xs:nonNegativeInteger" use="required"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="Colorway" type="xs:string" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Name of the colorway to select from the document-page.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="ThumbnailGUID" type="pf:GUID" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Resource ID of the thumbnail PNG as known in the cloud</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="JobLabel" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Job ticket to be printed along the part</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:choice maxOccurs="unbounded">
            <xs:element name="Name" type="xs:string">
              <xs:annotation>
                <xs:documentation>Name of the job ticket to be printed with this part. The name is referring to the name of the Label resource in the cloud.</xs:documentation>
              </xs:annotation>
            </xs:element>
            <xs:element name="Width">
              <xs:annotation>
                <xs:documentation>Width of the job ticket in units.</xs:documentation>
              </xs:annotation>
              <xs:simpleType>
                <xs:restriction base="xs:decimal">
                  <xs:minExclusive value="0"/>
                </xs:restriction>
              </xs:simpleType>
            </xs:element>
            <xs:element name="Height">
              <xs:annotation>
                <xs:documentation>Height of the job ticket in units.</xs:documentation>
              </xs:annotation>
              <xs:simpleType>
                <xs:restriction base="xs:decimal">
                  <xs:minExclusive value="0"/>
                </xs:restriction>
              </xs:simpleType>
            </xs:element>
            <xs:element name="Position" default="Bottom" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Position of the ticket relative to the part when AutoPosition is off.</xs:documentation>
              </xs:annotation>
              <xs:simpleType>
                <xs:restriction base="xs:string">
                  <xs:enumeration value="Bottom"/>
                  <xs:enumeration value="Top"/>
                  <xs:enumeration value="Left"/>
                  <xs:enumeration value="Right"/>
                </xs:restriction>
              </xs:simpleType>
            </xs:element>
            <xs:element name="AutoPosition" type="xs:boolean" default="false" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Automatically determine the position of the ticket, ignoring Position</xs:documentation>
              </xs:annotation>
            </xs:element>
            <xs:element name="InsideJob" type="xs:boolean" default="false" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Position the ticket inside the part content area. Respecting Position or AutoPosition</xs:documentation>
              </xs:annotation>
            </xs:element>
            <xs:element name="OffsetX" type="xs:decimal" default="0" minOccurs="0">
              <xs:annotation>
                <xs:documentation>X offset from the position determined by (Auto)Position.</xs:documentation>
              </xs:annotation>
            </xs:element>
            <xs:element name="OffsetY" type="xs:decimal" default="0" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Y offset from the position determined by (Auto)Position.</xs:documentation>
              </xs:annotation>
            </xs:element>
          </xs:choice>
        </xs:complexType>
      </xs:element>
      <xs:element name="Side" default="A" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Defines the side where this part should appear:
- A : Front side
- B : Back side
- X : Blocker layer</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:simpleContent>
            <xs:extension base="xs:string">
              <xs:attribute name="Work" use="optional" default="Turn">
                <xs:annotation>
                  <xs:documentation>Method of doublesided layout is used for this part: Turn or Tumble</xs:documentation>
                </xs:annotation>
                <xs:simpleType>
                  <xs:restriction base="xs:string">
                    <xs:enumeration value="Turn"/>
                    <xs:enumeration value="Tumble"/>
                  </xs:restriction>
                </xs:simpleType>
              </xs:attribute>
            </xs:extension>
          </xs:simpleContent>
        </xs:complexType>
      </xs:element>
      <xs:group ref="pf:JobPartNestingGroup" minOccurs="0"/>
      <xs:element name="TrueShapeNested" type="xs:boolean" default="false" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Indicates that the part its cut contour is to be used as mask during rendering.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:group ref="pf:JobPartTilingGroup" minOccurs="0"/>
      <xs:element name="CropBoxes" minOccurs="0">
        <xs:annotation>
          <xs:documentation>List of PDF crop boxes available for this part's document</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:sequence>
            <xs:element name="CropBox" maxOccurs="unbounded">
              <xs:complexType>
                <xs:sequence>
                  <xs:element name="Name" type="xs:string">
                    <xs:annotation>
                      <xs:documentation>Name of the cropbox used by selector SelectedCropBoxName</xs:documentation>
                    </xs:annotation>
                  </xs:element>
                  <xs:element name="Type">
                    <xs:annotation>
                      <xs:documentation>Type of box:
- Page : Page bounding box
- PDFBox : Box defined by the PDF
- UserDefined : Customer defined crop</xs:documentation>
                    </xs:annotation>
                    <xs:simpleType>
                      <xs:restriction base="xs:string">
                        <xs:enumeration value="Page"/>
                        <xs:enumeration value="PDFBox"/>
                        <xs:enumeration value="UserDefined"/>
                      </xs:restriction>
                    </xs:simpleType>
                  </xs:element>
                  <xs:element name="Rect">
                    <xs:complexType>
                      <xs:attribute name="Left" type="xs:decimal" use="required"/>
                      <xs:attribute name="Top" type="xs:decimal" use="required"/>
                      <xs:attribute name="Right" type="xs:decimal" use="required"/>
                      <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
                    </xs:complexType>
                  </xs:element>
                </xs:sequence>
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
      <xs:element name="SelectedCropBoxName" type="xs:string" minOccurs="0">
        <xs:annotation>
          <xs:documentation>SourceArea represent the crop box with this name in the CropBoxes list</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="StepAndRepeat" minOccurs="0">
        <xs:complexType>
          <xs:choice maxOccurs="unbounded">
            <xs:element name="Type">
              <xs:annotation>
                <xs:documentation>Step and repeat method:
0 : Off
1 : Straight
2 : Horizontal
3 : Vertical
4 : Horizontal return
5 : Vertical return
6 : Horizontal returned jump
7 : Vertical returned jump
8 : Horizontal and Vertical return</xs:documentation>
              </xs:annotation>
              <xs:simpleType>
                <xs:restriction base="xs:unsignedByte">
                  <xs:minInclusive value="0"/>
                  <xs:maxInclusive value="8"/>
                </xs:restriction>
              </xs:simpleType>
            </xs:element>
            <xs:element name="Design">
              <xs:annotation>
                <xs:documentation>Dimensions of the design to be stepped and repeated.</xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:attribute name="Width" use="required">
                  <xs:simpleType>
                    <xs:restriction base="xs:decimal">
                      <xs:minExclusive value="0"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:attribute>
                <xs:attribute name="Height" use="required">
                  <xs:simpleType>
                    <xs:restriction base="xs:decimal">
                      <xs:minExclusive value="0"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:attribute>
              </xs:complexType>
            </xs:element>
            <xs:element name="Offset" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Starting offset of the step-and-repeat pattern</xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:attribute name="X" type="xs:decimal" default="0"/>
                <xs:attribute name="Y" type="xs:decimal" default="0"/>
              </xs:complexType>
            </xs:element>
            <xs:element name="Repeats" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Number of repeats to be generated in each direction. When not present then the area defined by SourceArea is filled with the design.</xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:attribute name="X" type="xs:nonNegativeInteger" use="required"/>
                <xs:attribute name="Y" type="xs:nonNegativeInteger" use="required"/>
              </xs:complexType>
            </xs:element>
            <xs:element name="Spacing" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Space in between the repeated designs in each direction.</xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:attribute name="X" type="xs:decimal" use="required"/>
                <xs:attribute name="Y" type="xs:decimal" use="required"/>
              </xs:complexType>
            </xs:element>
            <xs:element name="Drop" minOccurs="0">
              <xs:annotation>
                <xs:documentation>Defines the drop at each step. Either defined a Numerator / Denominator or Size in units. When not present 0 drop is used.</xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:attribute name="Numerator" type="xs:nonNegativeInteger"/>
                <xs:attribute name="Denominator" type="xs:nonNegativeInteger"/>
                <xs:attribute name="Size">
                  <xs:simpleType>
                    <xs:restriction base="xs:decimal">
                      <xs:minInclusive value="0"/>
                    </xs:restriction>
                  </xs:simpleType>
                </xs:attribute>
              </xs:complexType>
            </xs:element>
          </xs:choice>
        </xs:complexType>
      </xs:element>
      <xs:element name="UserData" minOccurs="0">
        <xs:annotation>
          <xs:documentation>User defined Key/Value pairs as simple elements in this node.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:sequence>
            <xs:element name="BarCode" minOccurs="0">
              <xs:annotation>
                <xs:documentation>User's barcode related to this part. The barcode can be reference from the parts job ticket or other track and trace systems.</xs:documentation>
              </xs:annotation>
              <xs:complexType>
                <xs:simpleContent>
                  <xs:extension base="xs:string">
                    <xs:attribute name="Type" type="xs:string">
                      <xs:annotation>
                        <xs:documentation>Type of barcode; Code39 as default</xs:documentation>
                      </xs:annotation>
                    </xs:attribute>
                  </xs:extension>
                </xs:simpleContent>
              </xs:complexType>
            </xs:element>
            <xs:any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
      <xs:element name="Reprinted" type="xs:boolean" default="false" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Indicates that this parts is reprinted. Details are specified in the journal entry.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="Parts" type="pf:JobParts" minOccurs="0"/>
    </xs:choice>
  </xs:complexType>
</xs:element>

element JobParts/Part/GUID
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p239.png
namespace https://printfactory.cloud/schema/2.0
type pf:GUID
properties
content simple
facets
Kind Value Annotation
pattern [0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}
annotation
documentation
ID of the part
source <xs:element name="GUID" type="pf:GUID">
  <xs:annotation>
    <xs:documentation>ID of the part</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/OriginalPart
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p240.png
namespace https://printfactory.cloud/schema/2.0
type pf:GUID
properties
minOcc 0
maxOcc 1
content simple
facets
Kind Value Annotation
pattern [0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}
annotation
documentation
ID of the part from which this is a copy. Counting copies on the output page is based on this ID. When not present it is assumed to be value of GUID.
source <xs:element name="OriginalPart" type="pf:GUID" minOccurs="0">
  <xs:annotation>
    <xs:documentation>ID of the part from which this is a copy. Counting copies on the output page is based on this ID. When not present it is assumed to be value of GUID.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/CounterpartGUID
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p241.png
namespace https://printfactory.cloud/schema/2.0
type pf:GUID
properties
minOcc 0
maxOcc 1
content simple
facets
Kind Value Annotation
pattern [0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}
annotation
documentation
In case of a double sided job this it the ID of the part on the other side of the page.
source <xs:element name="CounterpartGUID" type="pf:GUID" minOccurs="0">
  <xs:annotation>
    <xs:documentation>In case of a double sided job this it the ID of the part on the other side of the page.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/SourcePage
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p242.png
namespace https://printfactory.cloud/schema/2.0
type xs:nonNegativeInteger
properties
minOcc 0
maxOcc 1
content simple
default 0
annotation
documentation
Page number of the document from which a part is output.
source <xs:element name="SourcePage" type="xs:nonNegativeInteger" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Page number of the document from which a part is output.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/SourceArea
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p243.png
namespace https://printfactory.cloud/schema/2.0
properties
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
Left  xs:decimal  required      
Top  xs:decimal  required      
Right  xs:decimal  required      
Bottom  xs:decimal  required      
annotation
documentation
Area from the source document its source page to be output.
source <xs:element name="SourceArea">
  <xs:annotation>
    <xs:documentation>Area from the source document its source page to be output.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="Left" type="xs:decimal" use="required"/>
    <xs:attribute name="Top" type="xs:decimal" use="required"/>
    <xs:attribute name="Right" type="xs:decimal" use="required"/>
    <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/SourceArea/@Left
type xs:decimal
properties
use required
source <xs:attribute name="Left" type="xs:decimal" use="required"/>

attribute JobParts/Part/SourceArea/@Top
type xs:decimal
properties
use required
source <xs:attribute name="Top" type="xs:decimal" use="required"/>

attribute JobParts/Part/SourceArea/@Right
type xs:decimal
properties
use required
source <xs:attribute name="Right" type="xs:decimal" use="required"/>

attribute JobParts/Part/SourceArea/@Bottom
type xs:decimal
properties
use required
source <xs:attribute name="Bottom" type="xs:decimal" use="required"/>

element JobParts/Part/Scale
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p244.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
X  xs:decimal    1    
Y  xs:decimal    1    
annotation
documentation
Scale factor; the source area will be output scaled by this factor.
source <xs:element name="Scale" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Scale factor; the source area will be output scaled by this factor.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="X" type="xs:decimal" default="1"/>
    <xs:attribute name="Y" type="xs:decimal" default="1"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/Scale/@X
type xs:decimal
properties
default 1
source <xs:attribute name="X" type="xs:decimal" default="1"/>

attribute JobParts/Part/Scale/@Y
type xs:decimal
properties
default 1
source <xs:attribute name="Y" type="xs:decimal" default="1"/>

element JobParts/Part/DestinationPage
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p245.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:positiveInteger
properties
minOcc 0
maxOcc 1
content simple
default 1
annotation
documentation
Page number of the ouput where the part is place. Output pages are 1 based.
source <xs:element name="DestinationPage" default="1" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Page number of the ouput where the part is place. Output pages are 1 based.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:positiveInteger"/>
  </xs:simpleType>
</xs:element>

element JobParts/Part/Position
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p246.png
namespace https://printfactory.cloud/schema/2.0
properties
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
X  xs:decimal  required      
Y  xs:decimal  required      
annotation
documentation
Position on the ouput page where the part is placed. The position is the left top corner of the bounding rectangle of the part incl. markup and decoration.
source <xs:element name="Position">
  <xs:annotation>
    <xs:documentation>Position on the ouput page where the part is placed. The position is the left top corner of the bounding rectangle of the part incl. markup and decoration.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="X" type="xs:decimal" use="required"/>
    <xs:attribute name="Y" type="xs:decimal" use="required"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/Position/@X
type xs:decimal
properties
use required
source <xs:attribute name="X" type="xs:decimal" use="required"/>

attribute JobParts/Part/Position/@Y
type xs:decimal
properties
use required
source <xs:attribute name="Y" type="xs:decimal" use="required"/>

element JobParts/Part/MediaSizeCompensation
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p247.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
X  xs:decimal        
Y  xs:decimal        
annotation
documentation
Compensation factors to be applied on the source scale to mitigate for stretch and shrink during production.
source <xs:element name="MediaSizeCompensation" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Compensation factors to be applied on the source scale to mitigate for stretch and shrink during production.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="X" type="xs:decimal"/>
    <xs:attribute name="Y" type="xs:decimal"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/MediaSizeCompensation/@X
type xs:decimal
source <xs:attribute name="X" type="xs:decimal"/>

attribute JobParts/Part/MediaSizeCompensation/@Y
type xs:decimal
source <xs:attribute name="Y" type="xs:decimal"/>

element JobParts/Part/Space
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p248.png
namespace https://printfactory.cloud/schema/2.0
type xs:decimal
properties
minOcc 0
maxOcc 1
content simple
default 0
annotation
documentation
Amount of space between this and other parts to be applied when this part is nested.
source <xs:element name="Space" type="xs:decimal" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Amount of space between this and other parts to be applied when this part is nested.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/MarkerSize
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p249.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
Left  xs:decimal    0    
Top  xs:decimal    0    
Right  xs:decimal    0    
Bottom  xs:decimal    0    
annotation
documentation
Border size around the part used for marks and decoration.
Default 0 when not present.
source <xs:element name="MarkerSize" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Border size around the part used for marks and decoration.
Default 0 when not present.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="Left" type="xs:decimal" default="0"/>
    <xs:attribute name="Top" type="xs:decimal" default="0"/>
    <xs:attribute name="Right" type="xs:decimal" default="0"/>
    <xs:attribute name="Bottom" type="xs:decimal" default="0"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/MarkerSize/@Left
type xs:decimal
properties
default 0
source <xs:attribute name="Left" type="xs:decimal" default="0"/>

attribute JobParts/Part/MarkerSize/@Top
type xs:decimal
properties
default 0
source <xs:attribute name="Top" type="xs:decimal" default="0"/>

attribute JobParts/Part/MarkerSize/@Right
type xs:decimal
properties
default 0
source <xs:attribute name="Right" type="xs:decimal" default="0"/>

attribute JobParts/Part/MarkerSize/@Bottom
type xs:decimal
properties
default 0
source <xs:attribute name="Bottom" type="xs:decimal" default="0"/>

element JobParts/Part/MarkerType
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p250.png
namespace https://printfactory.cloud/schema/2.0
type xs:unsignedInt
properties
minOcc 0
maxOcc 1
content simple
default 0
annotation
documentation
Registration marks used for this part. These bit flags as some can be combined but most are mutual exclusive:
0 : Registration marks
1 : Crop marks
2 : Border
3 : Template
4 : Subscript

Special part type when bit 11 (Placeholder) is set. Then the part has no output and is only showing marks. Usually in combination with one of the following cutter registration marks.
5 : OPOS marks
6 : EPOS marks
7 : HP marks
8 : Fotoba marks
12 : Roland marks
13 : Mimaki v1 marks
18: Graphtec marks
22 : Mimaki v2 marks
24 : Mimaki v0 marks
25 : Register page
26 : Roland GX marks
27 : Mimaki v3 marks
28 : Camera marks
source <xs:element name="MarkerType" type="xs:unsignedInt" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Registration marks used for this part. These bit flags as some can be combined but most are mutual exclusive:
0 : Registration marks
1 : Crop marks
2 : Border
3 : Template
4 : Subscript

Special part type when bit 11 (Placeholder) is set. Then the part has no output and is only showing marks. Usually in combination with one of the following cutter registration marks.
5 : OPOS marks
6 : EPOS marks
7 : HP marks
8 : Fotoba marks
12 : Roland marks
13 : Mimaki v1 marks
18: Graphtec marks
22 : Mimaki v2 marks
24 : Mimaki v0 marks
25 : Register page
26 : Roland GX marks
27 : Mimaki v3 marks
28 : Camera marks</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/Orientation
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p251.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:string
properties
minOcc 0
maxOcc 1
content simple
facets
Kind Value Annotation
enumeration Portrait
enumeration Landscape
enumeration Rotate180
enumeration Rotate270
annotation
documentation
Orientation intent for this part during nesting. When not defined this part is allowed to rotate freely.
source <xs:element name="Orientation" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Orientation intent for this part during nesting. When not defined this part is allowed to rotate freely.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Portrait"/>
      <xs:enumeration value="Landscape"/>
      <xs:enumeration value="Rotate180"/>
      <xs:enumeration value="Rotate270"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/Angle
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p252.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:decimal
properties
minOcc 0
maxOcc 1
content simple
default 0
facets
Kind Value Annotation
minInclusive 0
maxExclusive 360
annotation
documentation
Angle at which the part is output.
source <xs:element name="Angle" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Angle at which the part is output.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:decimal">
      <xs:minInclusive value="0"/>
      <xs:maxExclusive value="360"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/Mirror
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p253.png
namespace https://printfactory.cloud/schema/2.0
type xs:boolean
properties
minOcc 0
maxOcc 1
content simple
annotation
documentation
When set then the content of the part is mirror, the marks/decoration not.
source <xs:element name="Mirror" type="xs:boolean" minOccurs="0">
  <xs:annotation>
    <xs:documentation>When set then the content of the part is mirror, the marks/decoration not.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/BarCode
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p254.png
namespace https://printfactory.cloud/schema/2.0
type extension of xs:string
properties
minOcc 0
maxOcc 1
content complex
annotation
documentation
Barcode related to a placeholder part (MarkType bit 11 set) representing cutter registration marks. This barcode is copied into the job when the page is produced to inform the device driver.
source <xs:element name="BarCode" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Barcode related to a placeholder part (MarkType bit 11 set) representing cutter registration marks. This barcode is copied into the job when the page is produced to inform the device driver.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:simpleContent>
      <xs:extension base="xs:string"/>
    </xs:simpleContent>
  </xs:complexType>
</xs:element>

element JobParts/Part/BleedType
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p255.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:nonNegativeInteger
properties
minOcc 0
maxOcc 1
content simple
facets
Kind Value Annotation
minInclusive 0
maxInclusive 4
annotation
documentation
Type of bleed to be generated around the part when BleedSize is set:
0 : Mirror the content
1 : Stretch the edge of the content
2 : Solid color as defined by SolidBleedColor
3 : Document; extent the mask, usually taking the documents designed bleed
4 : Trueshape; Stretch or mirror the content within the cutcontours
source <xs:element name="BleedType" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Type of bleed to be generated around the part when BleedSize is set:
0 : Mirror the content
1 : Stretch the edge of the content
2 : Solid color as defined by SolidBleedColor
3 : Document; extent the mask, usually taking the documents designed bleed
4 : Trueshape; Stretch or mirror the content within the cutcontours</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:nonNegativeInteger">
      <xs:minInclusive value="0"/>
      <xs:maxInclusive value="4"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/BleedSize
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p256.png
namespace https://printfactory.cloud/schema/2.0
type xs:decimal
properties
minOcc 0
maxOcc 1
content simple
default 0
annotation
documentation
Amount of bleed to generate around the part
source <xs:element name="BleedSize" type="xs:decimal" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Amount of bleed to generate around the part</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/SolidBleedColor
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p257.png
namespace https://printfactory.cloud/schema/2.0
type xs:unsignedInt
properties
minOcc 0
maxOcc 1
content simple
annotation
documentation
RGB 8-bit packed color; R  + G * 256 + B * 65536
Used when BleedType=2
source <xs:element name="SolidBleedColor" type="xs:unsignedInt" minOccurs="0">
  <xs:annotation>
    <xs:documentation>RGB 8-bit packed color; R  + G * 256 + B * 65536
Used when BleedType=2</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/Border
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p258.png
namespace https://printfactory.cloud/schema/2.0
type extension of xs:decimal
properties
minOcc 0
maxOcc 1
content complex
default 0
attributes
Name  Type  Use  Default  Fixed  Annotation
Type  derived by: xs:string  required      
documentation
Method of how the border is to be displayed.
Color  derived by: xs:string  optional      
BoxName  derived by: xs:string  optional  Page    
documentation
PDF box to use as border of cut contour (when Type=Cut)
annotation
documentation
When present a border will be printed around the part.
The value represents the border offset. The border is moved outward by this value when positive on inward when negative.
source <xs:element name="Border" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>When present a border will be printed around the part.
The value represents the border offset. The border is moved outward by this value when positive on inward when negative.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:simpleContent>
      <xs:extension base="xs:decimal">
        <xs:attribute name="Type" use="required">
          <xs:annotation>
            <xs:documentation>Method of how the border is to be displayed.</xs:documentation>
          </xs:annotation>
          <xs:simpleType>
            <xs:restriction base="xs:string">
              <xs:enumeration value="Solid"/>
              <xs:enumeration value="Dash"/>
              <xs:enumeration value="Crop"/>
              <xs:enumeration value="Cut"/>
            </xs:restriction>
          </xs:simpleType>
        </xs:attribute>
        <xs:attribute name="Color" use="optional">
          <xs:simpleType>
            <xs:restriction base="xs:string">
              <xs:enumeration value="Black"/>
              <xs:enumeration value="Cyan"/>
              <xs:enumeration value="Magenta"/>
              <xs:enumeration value="Yellow"/>
              <xs:enumeration value="Red"/>
            </xs:restriction>
          </xs:simpleType>
        </xs:attribute>
        <xs:attribute name="BoxName" use="optional" default="Page">
          <xs:annotation>
            <xs:documentation>PDF box to use as border of cut contour (when Type=Cut)</xs:documentation>
          </xs:annotation>
          <xs:simpleType>
            <xs:restriction base="xs:string">
              <xs:enumeration value="Page"/>
              <xs:enumeration value="PrintBox"/>
              <xs:enumeration value="MediaBox"/>
              <xs:enumeration value="CropBox"/>
              <xs:enumeration value="BleedBox"/>
              <xs:enumeration value="TrimBox"/>
              <xs:enumeration value="ArtBox"/>
            </xs:restriction>
          </xs:simpleType>
        </xs:attribute>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/Border/@Type
type restriction of xs:string
properties
use required
facets
Kind Value Annotation
enumeration Solid
enumeration Dash
enumeration Crop
enumeration Cut
annotation
documentation
Method of how the border is to be displayed.
source <xs:attribute name="Type" use="required">
  <xs:annotation>
    <xs:documentation>Method of how the border is to be displayed.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Solid"/>
      <xs:enumeration value="Dash"/>
      <xs:enumeration value="Crop"/>
      <xs:enumeration value="Cut"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

attribute JobParts/Part/Border/@Color
type restriction of xs:string
properties
use optional
facets
Kind Value Annotation
enumeration Black
enumeration Cyan
enumeration Magenta
enumeration Yellow
enumeration Red
source <xs:attribute name="Color" use="optional">
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Black"/>
      <xs:enumeration value="Cyan"/>
      <xs:enumeration value="Magenta"/>
      <xs:enumeration value="Yellow"/>
      <xs:enumeration value="Red"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

attribute JobParts/Part/Border/@BoxName
type restriction of xs:string
properties
use optional
default Page
facets
Kind Value Annotation
enumeration Page
enumeration PrintBox
enumeration MediaBox
enumeration CropBox
enumeration BleedBox
enumeration TrimBox
enumeration ArtBox
annotation
documentation
PDF box to use as border of cut contour (when Type=Cut)
source <xs:attribute name="BoxName" use="optional" default="Page">
  <xs:annotation>
    <xs:documentation>PDF box to use as border of cut contour (when Type=Cut)</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Page"/>
      <xs:enumeration value="PrintBox"/>
      <xs:enumeration value="MediaBox"/>
      <xs:enumeration value="CropBox"/>
      <xs:enumeration value="BleedBox"/>
      <xs:enumeration value="TrimBox"/>
      <xs:enumeration value="ArtBox"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

element JobParts/Part/Document
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p259.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
GUID  pf:GUID  required      
Page  xs:nonNegativeInteger  required      
annotation
documentation
Reference to the Document section in the job. All parts must have this tag except for placeholder parts (MarkType bit 11 set)
source <xs:element name="Document" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Reference to the Document section in the job. All parts must have this tag except for placeholder parts (MarkType bit 11 set)</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="GUID" type="pf:GUID" use="required"/>
    <xs:attribute name="Page" type="xs:nonNegativeInteger" use="required"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/Document/@GUID
type pf:GUID
properties
use required
facets
Kind Value Annotation
pattern [0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}
source <xs:attribute name="GUID" type="pf:GUID" use="required"/>

attribute JobParts/Part/Document/@Page
type xs:nonNegativeInteger
properties
use required
source <xs:attribute name="Page" type="xs:nonNegativeInteger" use="required"/>

element JobParts/Part/Colorway
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p260.png
namespace https://printfactory.cloud/schema/2.0
type xs:string
properties
minOcc 0
maxOcc 1
content simple
annotation
documentation
Name of the colorway to select from the document-page.
source <xs:element name="Colorway" type="xs:string" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Name of the colorway to select from the document-page.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/ThumbnailGUID
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p261.png
namespace https://printfactory.cloud/schema/2.0
type pf:GUID
properties
minOcc 0
maxOcc 1
content simple
facets
Kind Value Annotation
pattern [0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-[0-9a-fA-F]{12}
annotation
documentation
Resource ID of the thumbnail PNG as known in the cloud
source <xs:element name="ThumbnailGUID" type="pf:GUID" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Resource ID of the thumbnail PNG as known in the cloud</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/JobLabel
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p262.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
children pf:Name pf:Width pf:Height pf:Position pf:AutoPosition pf:InsideJob pf:OffsetX pf:OffsetY
annotation
documentation
Job ticket to be printed along the part
source <xs:element name="JobLabel" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Job ticket to be printed along the part</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:choice maxOccurs="unbounded">
      <xs:element name="Name" type="xs:string">
        <xs:annotation>
          <xs:documentation>Name of the job ticket to be printed with this part. The name is referring to the name of the Label resource in the cloud.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="Width">
        <xs:annotation>
          <xs:documentation>Width of the job ticket in units.</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:decimal">
            <xs:minExclusive value="0"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Height">
        <xs:annotation>
          <xs:documentation>Height of the job ticket in units.</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:decimal">
            <xs:minExclusive value="0"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Position" default="Bottom" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Position of the ticket relative to the part when AutoPosition is off.</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:enumeration value="Bottom"/>
            <xs:enumeration value="Top"/>
            <xs:enumeration value="Left"/>
            <xs:enumeration value="Right"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="AutoPosition" type="xs:boolean" default="false" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Automatically determine the position of the ticket, ignoring Position</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="InsideJob" type="xs:boolean" default="false" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Position the ticket inside the part content area. Respecting Position or AutoPosition</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="OffsetX" type="xs:decimal" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>X offset from the position determined by (Auto)Position.</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="OffsetY" type="xs:decimal" default="0" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Y offset from the position determined by (Auto)Position.</xs:documentation>
        </xs:annotation>
      </xs:element>
    </xs:choice>
  </xs:complexType>
</xs:element>

element JobParts/Part/JobLabel/Name
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p263.png
namespace https://printfactory.cloud/schema/2.0
type xs:string
properties
content simple
annotation
documentation
Name of the job ticket to be printed with this part. The name is referring to the name of the Label resource in the cloud.
source <xs:element name="Name" type="xs:string">
  <xs:annotation>
    <xs:documentation>Name of the job ticket to be printed with this part. The name is referring to the name of the Label resource in the cloud.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/JobLabel/Width
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p264.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:decimal
properties
content simple
facets
Kind Value Annotation
minExclusive 0
annotation
documentation
Width of the job ticket in units.
source <xs:element name="Width">
  <xs:annotation>
    <xs:documentation>Width of the job ticket in units.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:decimal">
      <xs:minExclusive value="0"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/JobLabel/Height
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p265.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:decimal
properties
content simple
facets
Kind Value Annotation
minExclusive 0
annotation
documentation
Height of the job ticket in units.
source <xs:element name="Height">
  <xs:annotation>
    <xs:documentation>Height of the job ticket in units.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:decimal">
      <xs:minExclusive value="0"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/JobLabel/Position
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p266.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:string
properties
minOcc 0
maxOcc 1
content simple
default Bottom
facets
Kind Value Annotation
enumeration Bottom
enumeration Top
enumeration Left
enumeration Right
annotation
documentation
Position of the ticket relative to the part when AutoPosition is off.
source <xs:element name="Position" default="Bottom" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Position of the ticket relative to the part when AutoPosition is off.</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Bottom"/>
      <xs:enumeration value="Top"/>
      <xs:enumeration value="Left"/>
      <xs:enumeration value="Right"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/JobLabel/AutoPosition
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p267.png
namespace https://printfactory.cloud/schema/2.0
type xs:boolean
properties
minOcc 0
maxOcc 1
content simple
default false
annotation
documentation
Automatically determine the position of the ticket, ignoring Position
source <xs:element name="AutoPosition" type="xs:boolean" default="false" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Automatically determine the position of the ticket, ignoring Position</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/JobLabel/InsideJob
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p268.png
namespace https://printfactory.cloud/schema/2.0
type xs:boolean
properties
minOcc 0
maxOcc 1
content simple
default false
annotation
documentation
Position the ticket inside the part content area. Respecting Position or AutoPosition
source <xs:element name="InsideJob" type="xs:boolean" default="false" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Position the ticket inside the part content area. Respecting Position or AutoPosition</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/JobLabel/OffsetX
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p269.png
namespace https://printfactory.cloud/schema/2.0
type xs:decimal
properties
minOcc 0
maxOcc 1
content simple
default 0
annotation
documentation
X offset from the position determined by (Auto)Position.
source <xs:element name="OffsetX" type="xs:decimal" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>X offset from the position determined by (Auto)Position.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/JobLabel/OffsetY
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p270.png
namespace https://printfactory.cloud/schema/2.0
type xs:decimal
properties
minOcc 0
maxOcc 1
content simple
default 0
annotation
documentation
Y offset from the position determined by (Auto)Position.
source <xs:element name="OffsetY" type="xs:decimal" default="0" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Y offset from the position determined by (Auto)Position.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/Side
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p271.png
namespace https://printfactory.cloud/schema/2.0
type extension of xs:string
properties
minOcc 0
maxOcc 1
content complex
default A
attributes
Name  Type  Use  Default  Fixed  Annotation
Work  derived by: xs:string  optional  Turn    
documentation
Method of doublesided layout is used for this part: Turn or Tumble
annotation
documentation
Defines the side where this part should appear:
- A : Front side
- B : Back side
- X : Blocker layer
source <xs:element name="Side" default="A" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Defines the side where this part should appear:
- A : Front side
- B : Back side
- X : Blocker layer</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:simpleContent>
      <xs:extension base="xs:string">
        <xs:attribute name="Work" use="optional" default="Turn">
          <xs:annotation>
            <xs:documentation>Method of doublesided layout is used for this part: Turn or Tumble</xs:documentation>
          </xs:annotation>
          <xs:simpleType>
            <xs:restriction base="xs:string">
              <xs:enumeration value="Turn"/>
              <xs:enumeration value="Tumble"/>
            </xs:restriction>
          </xs:simpleType>
        </xs:attribute>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/Side/@Work
type restriction of xs:string
properties
use optional
default Turn
facets
Kind Value Annotation
enumeration Turn
enumeration Tumble
annotation
documentation
Method of doublesided layout is used for this part: Turn or Tumble
source <xs:attribute name="Work" use="optional" default="Turn">
  <xs:annotation>
    <xs:documentation>Method of doublesided layout is used for this part: Turn or Tumble</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Turn"/>
      <xs:enumeration value="Tumble"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

element JobParts/Part/TrueShapeNested
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p272.png
namespace https://printfactory.cloud/schema/2.0
type xs:boolean
properties
minOcc 0
maxOcc 1
content simple
default false
annotation
documentation
Indicates that the part its cut contour is to be used as mask during rendering.
source <xs:element name="TrueShapeNested" type="xs:boolean" default="false" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Indicates that the part its cut contour is to be used as mask during rendering.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/CropBoxes
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p273.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
children pf:CropBox
annotation
documentation
List of PDF crop boxes available for this part's document
source <xs:element name="CropBoxes" minOccurs="0">
  <xs:annotation>
    <xs:documentation>List of PDF crop boxes available for this part's document</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:sequence>
      <xs:element name="CropBox" maxOccurs="unbounded">
        <xs:complexType>
          <xs:sequence>
            <xs:element name="Name" type="xs:string">
              <xs:annotation>
                <xs:documentation>Name of the cropbox used by selector SelectedCropBoxName</xs:documentation>
              </xs:annotation>
            </xs:element>
            <xs:element name="Type">
              <xs:annotation>
                <xs:documentation>Type of box:
- Page : Page bounding box
- PDFBox : Box defined by the PDF
- UserDefined : Customer defined crop</xs:documentation>
              </xs:annotation>
              <xs:simpleType>
                <xs:restriction base="xs:string">
                  <xs:enumeration value="Page"/>
                  <xs:enumeration value="PDFBox"/>
                  <xs:enumeration value="UserDefined"/>
                </xs:restriction>
              </xs:simpleType>
            </xs:element>
            <xs:element name="Rect">
              <xs:complexType>
                <xs:attribute name="Left" type="xs:decimal" use="required"/>
                <xs:attribute name="Top" type="xs:decimal" use="required"/>
                <xs:attribute name="Right" type="xs:decimal" use="required"/>
                <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
              </xs:complexType>
            </xs:element>
          </xs:sequence>
        </xs:complexType>
      </xs:element>
    </xs:sequence>
  </xs:complexType>
</xs:element>

element JobParts/Part/CropBoxes/CropBox
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p274.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 1
maxOcc unbounded
content complex
children pf:Name pf:Type pf:Rect
source <xs:element name="CropBox" maxOccurs="unbounded">
  <xs:complexType>
    <xs:sequence>
      <xs:element name="Name" type="xs:string">
        <xs:annotation>
          <xs:documentation>Name of the cropbox used by selector SelectedCropBoxName</xs:documentation>
        </xs:annotation>
      </xs:element>
      <xs:element name="Type">
        <xs:annotation>
          <xs:documentation>Type of box:
- Page : Page bounding box
- PDFBox : Box defined by the PDF
- UserDefined : Customer defined crop</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:string">
            <xs:enumeration value="Page"/>
            <xs:enumeration value="PDFBox"/>
            <xs:enumeration value="UserDefined"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Rect">
        <xs:complexType>
          <xs:attribute name="Left" type="xs:decimal" use="required"/>
          <xs:attribute name="Top" type="xs:decimal" use="required"/>
          <xs:attribute name="Right" type="xs:decimal" use="required"/>
          <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
        </xs:complexType>
      </xs:element>
    </xs:sequence>
  </xs:complexType>
</xs:element>

element JobParts/Part/CropBoxes/CropBox/Name
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p275.png
namespace https://printfactory.cloud/schema/2.0
type xs:string
properties
content simple
annotation
documentation
Name of the cropbox used by selector SelectedCropBoxName
source <xs:element name="Name" type="xs:string">
  <xs:annotation>
    <xs:documentation>Name of the cropbox used by selector SelectedCropBoxName</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/CropBoxes/CropBox/Type
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p276.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:string
properties
content simple
facets
Kind Value Annotation
enumeration Page
enumeration PDFBox
enumeration UserDefined
annotation
documentation
Type of box:
- Page : Page bounding box
- PDFBox : Box defined by the PDF
- UserDefined : Customer defined crop
source <xs:element name="Type">
  <xs:annotation>
    <xs:documentation>Type of box:
- Page : Page bounding box
- PDFBox : Box defined by the PDF
- UserDefined : Customer defined crop</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:string">
      <xs:enumeration value="Page"/>
      <xs:enumeration value="PDFBox"/>
      <xs:enumeration value="UserDefined"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/CropBoxes/CropBox/Rect
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p277.png
namespace https://printfactory.cloud/schema/2.0
properties
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
Left  xs:decimal  required      
Top  xs:decimal  required      
Right  xs:decimal  required      
Bottom  xs:decimal  required      
source <xs:element name="Rect">
  <xs:complexType>
    <xs:attribute name="Left" type="xs:decimal" use="required"/>
    <xs:attribute name="Top" type="xs:decimal" use="required"/>
    <xs:attribute name="Right" type="xs:decimal" use="required"/>
    <xs:attribute name="Bottom" type="xs:decimal" use="required"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/CropBoxes/CropBox/Rect/@Left
type xs:decimal
properties
use required
source <xs:attribute name="Left" type="xs:decimal" use="required"/>

attribute JobParts/Part/CropBoxes/CropBox/Rect/@Top
type xs:decimal
properties
use required
source <xs:attribute name="Top" type="xs:decimal" use="required"/>

attribute JobParts/Part/CropBoxes/CropBox/Rect/@Right
type xs:decimal
properties
use required
source <xs:attribute name="Right" type="xs:decimal" use="required"/>

attribute JobParts/Part/CropBoxes/CropBox/Rect/@Bottom
type xs:decimal
properties
use required
source <xs:attribute name="Bottom" type="xs:decimal" use="required"/>

element JobParts/Part/SelectedCropBoxName
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p278.png
namespace https://printfactory.cloud/schema/2.0
type xs:string
properties
minOcc 0
maxOcc 1
content simple
annotation
documentation
SourceArea represent the crop box with this name in the CropBoxes list
source <xs:element name="SelectedCropBoxName" type="xs:string" minOccurs="0">
  <xs:annotation>
    <xs:documentation>SourceArea represent the crop box with this name in the CropBoxes list</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/StepAndRepeat
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p279.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
children pf:Type pf:Design pf:Offset pf:Repeats pf:Spacing pf:Drop
source <xs:element name="StepAndRepeat" minOccurs="0">
  <xs:complexType>
    <xs:choice maxOccurs="unbounded">
      <xs:element name="Type">
        <xs:annotation>
          <xs:documentation>Step and repeat method:
0 : Off
1 : Straight
2 : Horizontal
3 : Vertical
4 : Horizontal return
5 : Vertical return
6 : Horizontal returned jump
7 : Vertical returned jump
8 : Horizontal and Vertical return</xs:documentation>
        </xs:annotation>
        <xs:simpleType>
          <xs:restriction base="xs:unsignedByte">
            <xs:minInclusive value="0"/>
            <xs:maxInclusive value="8"/>
          </xs:restriction>
        </xs:simpleType>
      </xs:element>
      <xs:element name="Design">
        <xs:annotation>
          <xs:documentation>Dimensions of the design to be stepped and repeated.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="Width" use="required">
            <xs:simpleType>
              <xs:restriction base="xs:decimal">
                <xs:minExclusive value="0"/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
          <xs:attribute name="Height" use="required">
            <xs:simpleType>
              <xs:restriction base="xs:decimal">
                <xs:minExclusive value="0"/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:complexType>
      </xs:element>
      <xs:element name="Offset" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Starting offset of the step-and-repeat pattern</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="X" type="xs:decimal" default="0"/>
          <xs:attribute name="Y" type="xs:decimal" default="0"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="Repeats" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Number of repeats to be generated in each direction. When not present then the area defined by SourceArea is filled with the design.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="X" type="xs:nonNegativeInteger" use="required"/>
          <xs:attribute name="Y" type="xs:nonNegativeInteger" use="required"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="Spacing" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Space in between the repeated designs in each direction.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="X" type="xs:decimal" use="required"/>
          <xs:attribute name="Y" type="xs:decimal" use="required"/>
        </xs:complexType>
      </xs:element>
      <xs:element name="Drop" minOccurs="0">
        <xs:annotation>
          <xs:documentation>Defines the drop at each step. Either defined a Numerator / Denominator or Size in units. When not present 0 drop is used.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:attribute name="Numerator" type="xs:nonNegativeInteger"/>
          <xs:attribute name="Denominator" type="xs:nonNegativeInteger"/>
          <xs:attribute name="Size">
            <xs:simpleType>
              <xs:restriction base="xs:decimal">
                <xs:minInclusive value="0"/>
              </xs:restriction>
            </xs:simpleType>
          </xs:attribute>
        </xs:complexType>
      </xs:element>
    </xs:choice>
  </xs:complexType>
</xs:element>

element JobParts/Part/StepAndRepeat/Type
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p280.png
namespace https://printfactory.cloud/schema/2.0
type restriction of xs:unsignedByte
properties
content simple
facets
Kind Value Annotation
minInclusive 0
maxInclusive 8
annotation
documentation
Step and repeat method:
0 : Off
1 : Straight
2 : Horizontal
3 : Vertical
4 : Horizontal return
5 : Vertical return
6 : Horizontal returned jump
7 : Vertical returned jump
8 : Horizontal and Vertical return
source <xs:element name="Type">
  <xs:annotation>
    <xs:documentation>Step and repeat method:
0 : Off
1 : Straight
2 : Horizontal
3 : Vertical
4 : Horizontal return
5 : Vertical return
6 : Horizontal returned jump
7 : Vertical returned jump
8 : Horizontal and Vertical return</xs:documentation>
  </xs:annotation>
  <xs:simpleType>
    <xs:restriction base="xs:unsignedByte">
      <xs:minInclusive value="0"/>
      <xs:maxInclusive value="8"/>
    </xs:restriction>
  </xs:simpleType>
</xs:element>

element JobParts/Part/StepAndRepeat/Design
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p281.png
namespace https://printfactory.cloud/schema/2.0
properties
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
Width  derived by: xs:decimal  required      
Height  derived by: xs:decimal  required      
annotation
documentation
Dimensions of the design to be stepped and repeated.
source <xs:element name="Design">
  <xs:annotation>
    <xs:documentation>Dimensions of the design to be stepped and repeated.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="Width" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:decimal">
          <xs:minExclusive value="0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
    <xs:attribute name="Height" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:decimal">
          <xs:minExclusive value="0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/StepAndRepeat/Design/@Width
type restriction of xs:decimal
properties
use required
facets
Kind Value Annotation
minExclusive 0
source <xs:attribute name="Width" use="required">
  <xs:simpleType>
    <xs:restriction base="xs:decimal">
      <xs:minExclusive value="0"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

attribute JobParts/Part/StepAndRepeat/Design/@Height
type restriction of xs:decimal
properties
use required
facets
Kind Value Annotation
minExclusive 0
source <xs:attribute name="Height" use="required">
  <xs:simpleType>
    <xs:restriction base="xs:decimal">
      <xs:minExclusive value="0"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

element JobParts/Part/StepAndRepeat/Offset
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p282.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
X  xs:decimal    0    
Y  xs:decimal    0    
annotation
documentation
Starting offset of the step-and-repeat pattern
source <xs:element name="Offset" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Starting offset of the step-and-repeat pattern</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="X" type="xs:decimal" default="0"/>
    <xs:attribute name="Y" type="xs:decimal" default="0"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/StepAndRepeat/Offset/@X
type xs:decimal
properties
default 0
source <xs:attribute name="X" type="xs:decimal" default="0"/>

attribute JobParts/Part/StepAndRepeat/Offset/@Y
type xs:decimal
properties
default 0
source <xs:attribute name="Y" type="xs:decimal" default="0"/>

element JobParts/Part/StepAndRepeat/Repeats
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p283.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
X  xs:nonNegativeInteger  required      
Y  xs:nonNegativeInteger  required      
annotation
documentation
Number of repeats to be generated in each direction. When not present then the area defined by SourceArea is filled with the design.
source <xs:element name="Repeats" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Number of repeats to be generated in each direction. When not present then the area defined by SourceArea is filled with the design.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="X" type="xs:nonNegativeInteger" use="required"/>
    <xs:attribute name="Y" type="xs:nonNegativeInteger" use="required"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/StepAndRepeat/Repeats/@X
type xs:nonNegativeInteger
properties
use required
source <xs:attribute name="X" type="xs:nonNegativeInteger" use="required"/>

attribute JobParts/Part/StepAndRepeat/Repeats/@Y
type xs:nonNegativeInteger
properties
use required
source <xs:attribute name="Y" type="xs:nonNegativeInteger" use="required"/>

element JobParts/Part/StepAndRepeat/Spacing
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p284.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
X  xs:decimal  required      
Y  xs:decimal  required      
annotation
documentation
Space in between the repeated designs in each direction.
source <xs:element name="Spacing" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Space in between the repeated designs in each direction.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="X" type="xs:decimal" use="required"/>
    <xs:attribute name="Y" type="xs:decimal" use="required"/>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/StepAndRepeat/Spacing/@X
type xs:decimal
properties
use required
source <xs:attribute name="X" type="xs:decimal" use="required"/>

attribute JobParts/Part/StepAndRepeat/Spacing/@Y
type xs:decimal
properties
use required
source <xs:attribute name="Y" type="xs:decimal" use="required"/>

element JobParts/Part/StepAndRepeat/Drop
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p285.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
Numerator  xs:nonNegativeInteger        
Denominator  xs:nonNegativeInteger        
Size  derived by: xs:decimal        
annotation
documentation
Defines the drop at each step. Either defined a Numerator / Denominator or Size in units. When not present 0 drop is used.
source <xs:element name="Drop" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Defines the drop at each step. Either defined a Numerator / Denominator or Size in units. When not present 0 drop is used.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:attribute name="Numerator" type="xs:nonNegativeInteger"/>
    <xs:attribute name="Denominator" type="xs:nonNegativeInteger"/>
    <xs:attribute name="Size">
      <xs:simpleType>
        <xs:restriction base="xs:decimal">
          <xs:minInclusive value="0"/>
        </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/StepAndRepeat/Drop/@Numerator
type xs:nonNegativeInteger
source <xs:attribute name="Numerator" type="xs:nonNegativeInteger"/>

attribute JobParts/Part/StepAndRepeat/Drop/@Denominator
type xs:nonNegativeInteger
source <xs:attribute name="Denominator" type="xs:nonNegativeInteger"/>

attribute JobParts/Part/StepAndRepeat/Drop/@Size
type restriction of xs:decimal
facets
Kind Value Annotation
minInclusive 0
source <xs:attribute name="Size">
  <xs:simpleType>
    <xs:restriction base="xs:decimal">
      <xs:minInclusive value="0"/>
    </xs:restriction>
  </xs:simpleType>
</xs:attribute>

element JobParts/Part/UserData
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p286.png
namespace https://printfactory.cloud/schema/2.0
properties
minOcc 0
maxOcc 1
content complex
children pf:BarCode
annotation
documentation
User defined Key/Value pairs as simple elements in this node.
source <xs:element name="UserData" minOccurs="0">
  <xs:annotation>
    <xs:documentation>User defined Key/Value pairs as simple elements in this node.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:sequence>
      <xs:element name="BarCode" minOccurs="0">
        <xs:annotation>
          <xs:documentation>User's barcode related to this part. The barcode can be reference from the parts job ticket or other track and trace systems.</xs:documentation>
        </xs:annotation>
        <xs:complexType>
          <xs:simpleContent>
            <xs:extension base="xs:string">
              <xs:attribute name="Type" type="xs:string">
                <xs:annotation>
                  <xs:documentation>Type of barcode; Code39 as default</xs:documentation>
                </xs:annotation>
              </xs:attribute>
            </xs:extension>
          </xs:simpleContent>
        </xs:complexType>
      </xs:element>
      <xs:any processContents="skip" minOccurs="0" maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>
</xs:element>

element JobParts/Part/UserData/BarCode
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p287.png
namespace https://printfactory.cloud/schema/2.0
type extension of xs:string
properties
minOcc 0
maxOcc 1
content complex
attributes
Name  Type  Use  Default  Fixed  Annotation
Type  xs:string        
documentation
Type of barcode; Code39 as default
annotation
documentation
User's barcode related to this part. The barcode can be reference from the parts job ticket or other track and trace systems.
source <xs:element name="BarCode" minOccurs="0">
  <xs:annotation>
    <xs:documentation>User's barcode related to this part. The barcode can be reference from the parts job ticket or other track and trace systems.</xs:documentation>
  </xs:annotation>
  <xs:complexType>
    <xs:simpleContent>
      <xs:extension base="xs:string">
        <xs:attribute name="Type" type="xs:string">
          <xs:annotation>
            <xs:documentation>Type of barcode; Code39 as default</xs:documentation>
          </xs:annotation>
        </xs:attribute>
      </xs:extension>
    </xs:simpleContent>
  </xs:complexType>
</xs:element>

attribute JobParts/Part/UserData/BarCode/@Type
type xs:string
annotation
documentation
Type of barcode; Code39 as default
source <xs:attribute name="Type" type="xs:string">
  <xs:annotation>
    <xs:documentation>Type of barcode; Code39 as default</xs:documentation>
  </xs:annotation>
</xs:attribute>

element JobParts/Part/Reprinted
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p288.png
namespace https://printfactory.cloud/schema/2.0
type xs:boolean
properties
minOcc 0
maxOcc 1
content simple
default false
annotation
documentation
Indicates that this parts is reprinted. Details are specified in the journal entry.
source <xs:element name="Reprinted" type="xs:boolean" default="false" minOccurs="0">
  <xs:annotation>
    <xs:documentation>Indicates that this parts is reprinted. Details are specified in the journal entry.</xs:documentation>
  </xs:annotation>
</xs:element>

element JobParts/Part/Parts
diagram PrintFactoryJob_diagrams/PrintFactoryJob_p289.png
namespace https://printfactory.cloud/schema/2.0
type pf:JobParts
properties
minOcc 0
maxOcc 1
content complex
children pf:Part
source <xs:element name="Parts" type="pf:JobParts" minOccurs="0"/>


XML Schema documentation generated by XMLSpy Schema Editor http://www.altova.com/xmlspy